Boomba Racing Ford Fiesta ST Short Throw Shifter - Manual (Page 3)

1 Remove plastic vacuum hose from rubber
adaptor on the top of valve cover (leave
rubber adaptor in place).
29
Insert the Boomba Racing shifter arm into
the shifter housing. Gently tap the shift
pivot pin into position.
30
Reinstall the centering spring and the side
shifter adaptor.
31
Reinstall the side shift arm.
32
Install the shifter and secure it to the
base.
33
Install the shifter cables. Reconnect the
shifter links.
34
Install the center console.
35
Cut off the front corner of the reverse lock
around 3 mm (1/8”) from the edge.
36
Install the shifter cover. Reconnect the
power and the USB connectors. Install the
side panels. Reinstall and connect trim
panel.