Brandmotion 1008-9527-V2 - Manual (Page 25)

INSTALLATION INSTRUCTIONS
9527 Instructions 6-18-12 F series-1 (1).doc 25 of 38
Section 11A: Reference – Supplied Harness Pinouts
6-pin connector pinouts
PIN
#
FUNCTION
CAMERA
HARNESS
COLOR
CHASSIS
HARNESS
COLOR
INTERIOR
HARNESS
COLOR
1 Video (+) White White Gray/Dark
Blue
2 Shield Blue Blue White
3 Reverse Green Green Green
4 Video (-) Brown Brown Gray/Orange
5 Ground Black Black Black
6 Ignition Red Red Pink
Loose wires provided in the
Supplied Interior Harness
Function Wire color
Ground (-) Black
Reverse signal 12V Green
Ignition 12V Pink
Compass (+) Red
Compass (-) Yellow
Auto dimming (+) Orange
Auto dimming (-) White
16-pin connector pinout
PIN Circuit Description Wire Color
1 Not Used N/A
2 Not Used N/A
3 Camera Video Shield N/A
4 Camera Power (+) N/A
5 Dual Outside Drive EC (+) Orange
6 Camera NTSC Video (+) Gray/Blue
7 Camera NTSC Video (-) Gray/Orange
8 Vehicle Ground (-) Black
9 Reverse Input (Active High) Green
10 Camera Power (-) N/A
11 Not Used N/A
12 Not Used N/A
13 Ignition (Run Only Line) Pink
14 Not Used N/A
15 Not Used N/A
16 Dual Outside Drive EC (-) White
NOTE
Pin cavities are numbered on the
back side of the 16-pin connector.
Additionally, Brandmotion
identifies Pin 1 with a white mark.