Bully Dog 84010 Rapid Flow Exhaust System - Manual (Page 6)

5
rAPid FlOW inSTAllATiOn
rapid Flow exhaust # 84010
3. As was done on the tail pipe, remove
all exhaust hangers from the rubber
grommets. To make removing the hangers
an easier process, it is recommended that
you use a graphite spray lubricant to spray
each of the rubber hangers holding the stock
exhaust. Once that is done the muffler and
attached exhaust tubing will remove in one
large section.
One Piece Removal
REmoVal of stoCk Exhaust systEm
Remove all the Necessary Exhaust Hangers