Rapid flow installation – Bully Dog 83210 Rapid Flow User Manual
Page 4
Advertising
3
rAPid FlOW inSTAllATiOn
Important: It is illegal in all 50 states and Canada to remove the Diesel particulate Filter
REMOVAL OF STOCk EXHAUST SySTEM
In these steps you will remove the stock exhaust system.
1.Use a Sawzall and cut exhaust pipe
behind muffler.
2. To make removing the Hangers
an easier process it is recommend-
ed that you use a silicone spray
lubricant to spray each
of the rubber
hangers hold-
ing the stock
exhaust.
3. Remove tail pipe from rubber insulators to remove
tail pipe from muffler.
4. Using a 15mm socket to loosen and
remove flange in front of muffler,
also remove from rubber insulators
to completely remove muffler.
Sawzall behind the Muffler
Remove Tail Pipe
Loosen flange in front of muffler
Remove muffler
15mm
Advertising
This manual is related to the following products: