Bully Dog 83210 Rapid Flow - Manual (Page 7)

6
rAPid FlOW inSTAllATiOn
5. Now install the ceramic coated tip and
tighten it with a 17mm wrench.
6. Once the entire exhaust system is in-
stalled, inspect the system to ensure
that no part of the exhaust is in direct
contact with the chassis or body; ad-
justments may be necessary.
7. Return to each of the clamps and tighten
with a 15mm wrench also tighten the
bolts on the flange part of the adapter
pipe. Do not over tighten the clamps.
Tighten all Band Clamps
Install Tip
Complete System Installed
15mm