Calculated Industries 6425-C - Manual (Page 34)

32 — DigiRoller
™
Plus II
Taking Wall Area Measurements
The DigiRoller ™ Plus II can calculate the total wall surface area of a
room. Wall area is defined as:
([Length x 2] x Height) + ([Width x 2] x Height)
You will only need to roll a length and width, and roll or set a height.
Then you can calculate the total wall surface area of that room. See
the “Taking Volume Measurements” section (page 22) for information
on rolling or setting a fixed height.
6425-UG-C 4/4/03 12:44 PM Page 34