Calculated Industries 6025 - Manual (Page 14)

Imperial/Metric Modes
The Scale Master Pro is set up to use Imperial
(Standard) dimensional units by default. The
Scale Master Pro can be set to Metric Mode by
switching the
IMP/MET switch to MET.
While in Metric mode, MET will remain lit
in the display.
Built-In Scales
Imperial (Standard) Units
Architect Engineer-I Engineer-II
ARCH ENGI ENGII
1 foot=
1 inch= 1 inch=
1/4” 10.0’ 300.0’
3/8” 20.0’ 333.3’
1/2” 30.0’ 400.0’
3/4” 40.0’ 416.6’
1/1 (1”) 50.0’ 500.0’
3/2 (1 1/
2
”) 60.0’ 583.3’
2/1 (2”) 83.3’ 600.0’
3/1 (3”) 100.0’ 625.0’
4/1 (4”) 166.6’ 666.6’
1/32” 200.0’ 750.0’
1/16” 250.0’ 1,000.0’
3/32” 1,200.0’
1/8” 2,000.0’
3/16” 3,000.0’
User’s Guide – 10