Calculated Industries 6025 - Manual (Page 22)

Setting Custom Scales
You can store six Custom Scales: three in
Imperial Mode and three in Metric Mode.
You can set a custom scale two ways: by
“rolling in” a known distance or by entering
the exact distance.
Rolling a Custom Scale
1) Press [MODE] until # OPEN (# being
a number 1-3) appears in the scale box
display.
2) Press [SET] [SCALE] . “ ROLL ” will appear
in the main display.
3) Roll desired distance. “ ROLLING ” now
appears in the main display.
4) Press [SCALE] . The annunciator will
begin flashing “ FT IN ” for Imperial
Mode, “ M ” for Metric Mode.
5) To change the units of measurement,
press [UNITS] until your desired units
appear. Press the [M+] ( X ) or the [LxW]
( W ) key to begin setting the distance.
The selected digit will start flashing.
(cont’d)
User’s Guide – 18