Calculated Industries 6025 - Manual (Page 29)

Battery/Automatic Shut-Off
The Scale Master Pro is powered by two 3-Volt
CR-2032 Lithium batteries (6 volts total). To
conserve battery power, the unit will shut
itself off if it is not used for 4-6 minutes.
Press the
[ON/CLEAR] key to restore power.
All registers and settings remain intact,
including all temporary registers.
Battery Replacement
To replace the batteries:
(1) To remove battery
door, release snap lock in
slot and lift;
(2) Remove batteries and
replace with new batteries
positive side up.
(3) To replace the door,
slide it at an angle and
push down.
25 – Scale Master
®
Pro