Cineo Lighting TruColor HS - Manual (Page 2)

2
TruColor HS™ delivers an unprecedented
volume of soft light optimized for image
capture, as well as other applications
that demand accurate color rendering. By
harnessing Remote Phosphor Technology
(RPT), the TruColor HS equals the output of a
4K incandescent soft light using less than 450
watts of AC power. This means you can plug
several units into a single 15 amp circuit and
avoid the added cost of generators, fuel, and
heavy cables. Operating temperatures are
also signifi cantly reduced, producing virtually
no heat in the illuminated area.
Rather than traditional diffusion to soften
the light source, the light actually emits from
the RPT panels on the front of the fi xture,
providing a light characteristic that radiates
equally in a 160º radius. The ability for
TruColor HS light to “wrap” your subject with
soft, edgeless shadows are unlike any fi xture
you’ve ever used.
The HS fi xture uses interchangeable
polycarbonate panels that have been coated
with a special phosphor mix to generate
white light. The panels are available in
standard CCTs for fi lm and television lighting
applications: 2700K, 3200K, 4300K, 5600K
6500K. Additionally, a panel sets specifi cally
formulated for chroma green and blue screen
lighting is also available. The phosphors are
excited by blue LEDs, which are automatically
turned off when the phosphor panels are
removed. The color temperature of the
TruColor HS is extremely consistent fi xture
to fi xture, and will not change over time like
other lighting technologies.
The TruColor HS is extremely durable, built to
last with anodized alloy construction, fl exible
polycarbonate panels, and fi eld-serviceable
components. The fi xture PSU includes both
local and DMX control, and connects to the
lamphead with a ruggedized multi-core cable.
The TruColor HS is fl icker-free and passively
cooled, perfect for any fi lm or television
project, in the studio or on location.
Welcome to TruColor HS