Clay Paky A.LEDA WASH K20 TW (C61411) - Manual (Page 13)

13 A.LEDA WASH CC TW W
3
1
2
3
2
1
4
INSTALLATION AND START-UP
Connecting and disconnecting power cable - Fig. 4
Installing the projector - Fig. 3
The projector can be installed on the floor resting on special rubber feet, on a truss or on the ceiling or wall.
WARNING: with the exception of when the projector is positioned on the floor, the safety cable must be fitted. (Cod. 105041/003 available on request).
This must be securely fixed to the support structure of the projector and then connected to the fixing point at the centre of the base.