Cyclopital3D FinePix Real 3D W1 camera - Manual (Page 115)

101
T
rouble
shoot
in
g
Warning Messages and Displays
Warning Warning Description Description Solution Solution
PRESS AND HOLD
THE DISP BUTTON TO
DEACTIVATE SILENT MODE
An attempt was made to choose a fl ash mode
or adjust the volume with the camera in silent
mode.
Exit silent mode before choosing a fl ash mode or ad-
justing the volume.
COMMUNICATION ERROR
A connection error occurred while pictures
were being printed or copied to a computer or
other device.
Confi rm that the device is turned on and that the USB
cable is connected.
PRINTER ERROR
Printer out of paper or ink, or other printer er-
ror.
Check printer (see printer manual for details). To resume
printing, turn the printer off and then turn it back on.
PRINTER ERROR
RESUME?
Check printer (see printer manual for details). If printing
does not resume automatically, press MENU/OK to resume.
CAN NOT BE PRINTED
An attempt was made to print a movie, a pic-
ture not created with the camera, or a picture
in a format not supported by the printer.
Movies and some pictures created with other devices
can not be printed. If the picture was created with the
camera, check the printer manual to confi rm that the
printer supports the JFIF-JPEG or Exif-JPEG format. If it
does not, the pictures can not be printed.