Cyclopital3D FinePix Real 3D W1 camera - Manual (Page 22)

8
Inserting a Memory Card
1 Open the battery-chamber cover.
1 Note
Be sure the camera is off
before opening the battery-
chamber cover.
2 Insert the memory card.
Holding the memory card in the orientation
shown below, slide it in until it clicks into
place.
Be sure card is in correct ori-
entation; do not insert at an
angle or use force.
3 Close the battery-chamber cover.
Removing Memory Cards
After confi rming that the camera
is off , press the card in and then
release it slowly. The card can
now be removed by hand.
3 Cautions
• The memory card may spring out if you remove
your fi nger immediately after pushing the card in.
• Memory cards may be warm to the touch after be-
ing removed from the camera. This is normal and
does not indicate a malfunction.
■ ■ Inserting a Memory Card Inserting a Memory Card