Cyclopital3D FinePix Real 3D W1 camera - Manual (Page 64)

50
Viewing Pictures on a Computer
The supplied FinePixViewer software can be used to copy pictures to a computer, where they can be
stored, viewed, organized, and printed. Before proceeding, install FinePixViewer as described below.
Do
NOT
connect the camera to the computer until installation is complete.
Installing FinePixViewer Installing FinePixViewer
1 Confi rm that the computer meets the following system requirements:
OS OS
Preinstalled versions of Windows Vista, Windows XP Home Edition (Service Pack 2), or Windows XP Professional
(Service Pack 2)
CPU CPU
• Windows Vista: 800 MHz Pentium 4 or better (3 GHz Pentium 4 or better recommended)
• Windows XP: 800 MHz Pentium 4 or better (2 GHz Pentium 4 or better recommended)
RAM RAM
• Windows Vista: 512 MB or more (1 GB or more recommended)
• Windows XP: 512 MB or more
Free disk Free disk
space space
A minimum of 450 MB required for installation with 600 MB available when FinePixViewer is running (15 GB or
more recommended under Windows Vista, 2 GB or more recommended under Windows XP)
Video Video 800 × 600 pixels or more with 16-bit color or better (1,024 × 768 pixels or more with 32-bit color recommended)
Other Other
• Built-in USB port recommended. Operation is not guaranteed with other USB ports.
• Internet connection (56 kbps or faster recommended) required to use FinePix Internet Service; Internet con-
nection and e-mail software required to use e-mail option.
3 Caution
For information about Windows 7, visit http://www.fujifilm.com/support/download/camera/software/. Other
versions of Windows are not supported. Operation is not guaranteed on home-built computers or computers
that have been upgraded from earlier versions of Windows.
2 Start the computer. Log in to an account with administrator privileges before proceeding.