Bel Canto Design E.ONE DAC3.5VB - Manual (Page 8)

The DAC3.5 VB MKII Remote Control has a
comprehensive set of control features that are not
available on the front panel, including expanded
programmability.
To access all DAC3.5 VB MKII control features press
the button marked DAC towards the bottom of the
remote control. (The Main CD controls will still
operate in the DAC, PRE and Tuner modes.)
PGM: Enter program mode. Here you can assign a
four character name to each input, turn each input ON
or OFF, and/or activate Home Theater Bypass for the
Analog Input.
Use the four directional keys at the top of the remote
to navigate programming options. Make your
selection by pressing the ENTER key.
After selecting YES when entering program mode,
you can name any or all inputs. Use the LEFT or
RIGHT arrow to select the input to name. Hit ENTER.
Use the right key to select one of four characters to
modify. You can quickly scroll through the characters
(A-Z, 0-9, or blank) using the UP and DOWN arrows.
After finishing naming the selected input, press
ENTER.
Before or after naming an input, you can turn an
input ON or OFF by using the UP and DOWN
buttons to select ON or OFF and then hitting
ENTER.
When on the ANALOG input, you can also choose
Home Theatre Bypass (HTB). In this mode, the
analog input simply passes signal through with a
fixed output level. Note that this disables the volume
control and requires that the volume control on the
Home Theater processor be used. Use this feature
only with a volume controlled line level source.
Using this with the fixed output of a CD player,
for example, could result in damage to the
amplifier or loudspeaker!
When you wish to exit Program mode, simply hit the
PGM button. You will then be prompted to save
your changes. Toggle between YES and NO and
then hit ENTER.
To restore Factory Default settings: Hold
in the Control Knob while powering up the
DAC3.5VB MKII, and continue to hold until
the display finishes its startup sequence.
VOL+: Increases the volume setting in Variable
Output mode. This will Punch Through to any Bel
Canto unit in Variable Output mode. The display will
show the volume level while changing.
VOL-: Decreases the volume setting in Variable
Output mode. This will Punch Through to any Bel
Canto unit in Variable Output mode. The display will
show the volume level while changing.
CH/SCAN+: Toggles the input selection up in
number and wrap around. Note that the first press of
this control will show the active input selection.
CH/SCAN-: Toggles the input selection down in
number and wrap around. Note that the first press of
this control will show the active input selection.