DJI S800 - Manual (Page 17)

©2012 DJI Innovations. All Rights Reserved.
17
Trouble Shooting
If the motor mount loosens, please tighten it by following the procedures.
Step1 For arms For arms
Shim
Step2
Motor mount screws
Step3 For arms For arms
Step1: Remove. Please unscrew the screws on the top.
Step2: Tighten. Retighten the motor mount screws on the back to make the motor firmly attached.
Step3: Remount. Remount the screws on the top.
Notices:
Shim should be mounted in the correct position, as shim mount position of arm is different from arm .
Tips:
 Please use adequate screw glue.
 Install screws with appropriate strength.