BodyCraft BCG 446 - Manual (Page 11)

10
STEP 5 ASSEMBLE PRESS STATION
10
20
21
93
76
33
33
32
32
66
66
85
71
88
88
36
36
55
55
76
90
90
90
87
93
32
32
32
67
67
86
74
23
3
Insert two 5/8" ID BUSHINGS(66) into TOP FRAME(10).
Attach PRESS ARM(20) to TOP FRAME(10) using 5/8" X 7-1/2" HEX HEAD BOLT(71),
two 5/8" WASHER(88) and 5/8" NYLON NUT(85).
Attach PRESS SEAT FRAME(21) to PRESS UPRIGHT(3) using two 3/8' X 4" HEX
HEAD BOLT(76), four 3/8" WASHER(90) and two 3/8" NYLON NUT(87).
Attach LEG EXTENSION(23) to PRESS SEAT FRAME(21) using 1/2" X 3-1/8" HEX
HEAD BOLT(74), two 1/2" WASHER(89) and 1/2" NYLON NUT(86), then cap 1/2" bolt
and nut with CAP FOR 1/2" NUT(93).