BodyCraft BCG 446 - Manual (Page 13)

12
STEP 7 INSTALL PEC DEC CABLE
(46a)
P1
P1
P1, P5
P2
P2
P2, P4
P4
P4
P5
P5
P3
P3
28
14
17R
17L
46a
12
18
18
81
82
81
90
90
90
87
87
49
49
Loosely attach pulley P2 and P4 and CABLE GUIDE(18) to PEC DEC PULLEY
BRACKET(12).
Insert one end of PEC DEC CABLE(46a) into receiver on right ADJ CAM(14) as shown
and route cable over pulley, behind PEC DEC UPRIGHT(2), over pulley and insert
opposite end into receive on left ADJ CAM(14).
Place pulley P3 over the PEC DEC CABLE(46a) and attach SINGLE PULLEY
BRACKET(28) as shown and let it dangle behind PEC DEC UPRIGHT(2).
Tighten bolts. Make certain the CABLE GUIDE(18) do not rub on the cable
throughout the entire range of motion.