Figure 16, Connecting the drainage tubings – Metrohm 872 Extension Module Liquid handling User Manual
Page 30
Advertising
4.4 Setting up the extension module next to the IC instrument
■■■■■■■■■■■■■■■■■■■■■■
22
■■■■■■■■
872 Extension Module – Liquid handling
6 Connecting the leak sensor
■
Plug the 6.2103.170 adapter into the leak sensor connector of
the IC instrument.
■
Connect the leak sensor cable of the IC instrument to the adapter.
■
Connect the leak sensor cable of the extension module to the
adapter.
7 Connecting the drainage tubings
1
2
3
4
5
Figure 16
Connecting the drainage tubings
1
Drainage tubing connector
For draining escaped liquid from the bottle
holder.
2
Drainage tubing
Section of the 6.1816.020 silicon tubing. For
draining escaped liquid from the bottle
holder.
Advertising