Metrohm NIRS XDS Process Analyzer – SingleFiber - Manual (Page 27)

▪▪▪▪▪▪▪ 25
4
Site Requirements
The XDS Process Analytics Instrument specifications are given in section 3.0. These specifications
include weight, AC Power (Mains) requirements, air supply, temperature, and humidity conditions.
This section includes dimensional drawings and recommended space for service access.
Dimensions of Basic XDS Process Analytics Instrument. Depth (front to back) is 14.25” (362mm).
The upper mounting feet are positioned upward as shown, for best support of the hanging load. The
distance between centers of the upper mounting holes is 14.5” (368.3mm).
The lower mounting feet are positioned outwardly, which makes it simpler to handle the unit during
transport and testing. This also permits flush mounting the cabinet on the bottom. The distance
between centers of the lower mounting holes is 17.5” (444.5mm).
The vertical distance between the center lines of the upper and lower mounting feet is 24”
(609.6mm).