Metrohm TiNet 2.5 - Manual (Page 10)

8 • Overview TiNet 2.5 Compliant
1.2 Program installation
1.2.1 System requirements
Computer recommended Pentium processor
Operating system Windows 98/Me, Windows NT 4.0,
Windows 2000 (recommended), Windows XP
Disk space Program: min. 30 MB on hard disk
Data: min. 150 MB
RAM recommended 32 MB
ComPorts 1 free COM port per connected device
LPT 1 free LPT per connected Sample Changer with 664
Control Unit
1.2.2 Installation of TiNet 2.5 Compliant
Note: Start directly with Step 5, if you do not want to generate and print
PDF reports.
1. If the Adobe Acrobat Reader program is not already installed on the
computer, open the Acro5/English directory for Adobe Acrobat Reader
installation on the installation CD and start the *.exe file.
2. After completion of the installation, open Acrobat Reader, accept the
contract, open a PDF file, print it, and close Acrobat Reader.
3. Open the PDFFact/English directory for Fineprint PDFFactory Pro
printer driver installation on the installation CD. According to your op-
erating system, open the
95_98_ME or NT2000XP directory and start the
*.exe file.
4. Click on <Setup> and confirm the installation procedure with <Yes> .
Important: The installed printer driver "FinePrint pdfFactory Pro" is a
shareware version with all functions, which creates a message on
each report. If you like to print reports without this message, the full
version of "PDF Factory Pro" must be purchased. You will find ordering
information on www.fineprint.com/company/resellers.html.
5. Install TiNet 2.5 from the installation CD and proceed according to the
installation wizard until the window Installation versions appears.