13 connecting the instrument to a computer – Metrohm 930 Compact IC Flex ChS/PP User Manual
Page 50
Advertising
3.13 Connecting the instrument to a computer
■■■■■■■■■■■■■■■■■■■■■■
42
■■■■■■■■
930 Compact IC Flex ChS/PP (2.930.1300)
1 Connect the out capillary of the suppressor and the detector input
capillary to one another using a coupling (6.2744.040) and two short
pressure screws (6.2744.070).
3.13
Connecting the instrument to a computer
NOTE
The instrument must be switched off when being connected to a com-
puter.
Accessories
For this step you need the following accessories:
■
USB connecting cable (6.2151.020)
■
USB connection cable (6.2151.020) from the accessory kit: Vario/Flex
Basic (6.5000.000)
Connecting the USB cable
1 Insert the USB cable into the computer connection socket on the rear
of the instrument.
Advertising