2 deaerating the high pressure pump, Deaerating the high pressure pump – Metrohm 850 Professional IC Anion MCS Gradient User Manual

Page 44

Advertising
background image

2.10 High pressure pump

■■■■■■■■■■■■■■■■■■■■■■

34

■■■■■■■■

850 Professional IC –Anion – MCS – Gradient

2.10.2

Deaerating the high pressure pump

The high pressure pump will only operate perfectly if the pump head con-
tains no more air bubbles. Therefore it must be deaerated during initial
start-up and after every change of eluent.

Caution

The high pressure pump must not be deaerated before the initial start-
up (see Chapter 3.1, page 65).

Deaerate the high pressure pump as follows (see Figure 19, page 35):

Advertising