Metrohm 888 Titrando - Manual (Page 10)

1.2 Instrument description
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
2 ￭￭￭￭￭￭￭￭
888 Titrando
Up to three control instruments (Titrando, Dosing Interface, USB Sample
Processor, etc.) can be controlled via USB connection during operation
with the 900 Touch Control.
You can request information on special applications in the "Application
Bulletins" and "Application Notes", available free of charge through the
responsible Metrohm representative. Various monographs on the subjects
of titration techniques and electrodes are also available.
Updating the device software is described in the Help for the correspond-
ing PC software.
1.2 Instrument description
The 888 Titrando has the following characteristics:
￭ Operation
Operation is carried out by means of a touch-sensitive Touch Control
or with high-performance PC software.
￭ Dosing
An internal dosing drive for exchange units.
￭ MSB connectors
Four MSB connectors (Metrohm Serial Bus) for connecting dosing devi-
ces (Dosimat with exchange unit or Dosino with dosing unit), stirrers,
titration stands and Remote Boxes.
￭ USB connectors
Two USB connectors, through which devices such as printers, PC key-
boards, barcode readers or additional control instruments (USB Sample
Processor, Titrando, Dosing Interface, etc.) can be connected.
￭ Measuring interface
One measuring input each for:
– a potentiometric electrode (pH, metal or ion-selective electrode)
– a separate reference electrode
– a temperature sensor (Pt1000 or NTC)
– a polarizable electrode
– an iConnect (measuring interface for electrodes with integrated
data chip, so-called iTrodes)