Metrohm Vision – Diagnostics - Manual (Page 11)

▪▪▪▪▪▪▪ 9
Confirmation of Instrument configuration
If the instrument configuration is not
recognized upon connection, Vision prompts
for full instrument configuration information,
including serial numbers of the
monochromator and modules. A typical screen
for a simple configuration is shown.
For instruments with fiber-optic sampling
devices, the tip, material, and fiber length are
required. For multiplexed process systems,
enter this information for each channel.
Vision builds a database of diagnostic
information for the instrument. It is vital to
enter correct information, to assure
application of correct tolerances for tests and
for accurate tracking of test results.
Tools for export, import and archiving of information in case of computer upgrades, changes, or
instrument moves, are explained under Diagnostic Database.
1.1 Vision Diagnostics Screen Display
Vision Diagnostics use a split-screen display to provide as much information as possible to the user.
This is a screen displayed during the Performance Test; other tests use the same display format.
Because each part of the screen may be used at different points during the test, all are displayed in
small size, and can easily be enlarged for better viewing. Each part of the screen is discussed in the
section following.
Vision Diagnostics Screen Display