Metrohm Vision – Diagnostics - Manual (Page 21)

▪▪▪▪▪▪▪ 19
2.7 Performance Test Timer
The Performance Test Timer permits the user to
automatically set the instrument to run the
Performance Test unattended. It may be set for
a time interval or on a daily basis at a preset
time. Use military time for time of day, i.e.,
20:45 for 8:45 p.m. Be sure the instrument is
left on with the reference in the correct position
for Performance Test.
If the specified time has passed, Performance Test begins immediately upon successful connection
with the instrument.
Note that there is a Diagnostic Timer under Diagnostic Database, where many functions can be set
up for timed testing and storage of results. See Diagnostic Database for more information.