Metrohm Additional eluent for 941 - Manual (Page 13)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Installation
IC equipment: Additional eluent for 941
￭￭￭￭￭￭￭￭ 7
6 Bundling the level sensor cables and tubings
NOTE
The fine connection cables of the level sensor cable break off easily
if the bottle cap is rotated too much.
The level sensor cable is damaged as a result and needs to be
replaced.
To prevent the connection cables from breaking off, we recom-
mend bundling the level sensor cable together with the tubings
that are connected to the bottle cap.
Tie the level sensor cable, the FEP tubing and the eluent aspiration
tubing together using a spiral band. Tie a piece of spiral band with a
length of approx. 10 cm around the cable and the tubings as close as
possible to the bottle cap.
3.2 Connecting the concentrate bottle
The bottle with the concentrate can be equipped with a bottle cap with-
out level sensor, e.g. with the eluent bottle cap (6.1602.160).
Required accessories ￭ Bottle (6.1608.070) filled with concentrate
￭ Eluent bottle cap (6.1602.160), included in the accessories for the ion
chromatograph
￭ FEP aspiration tubing (6.1819.100)
￭ FEP tubing (6.1805.530)
￭ Adsorber tube (6.1609.000)
￭ SGJ clip for SGJ 14/15 (6.2023.020), included in the accessories for the
eluent bottle cap (6.1602.160)
￭ M6 threaded stopper (6.1446.040), included in the accessories for the
eluent bottle cap (6.1602.160)