Beko AUTOMATIC WASHING MACHINE WM 7335 W User Manual
Page 8
EN
8
fuse need to be replaced an ASTA
approved BS1362 fuse of the same
rating must be used. Do not forget to
refit the fuse cover. In the event of losing
the fuse cover, the plug must not be
used until a replacement fuse cover has
been fitted. Colour of the replacement
fuse cover must be the same colour as
that visible on the pin face of the plug.
Fuse covers are available from any good
electrical store.
Important
Fitting a different plug
As the colours of the wires in the
mains lead of this appliance may not
correspond with the coloured markings
identifying the terminals on your plug,
proceed as follows:
1 Connect the green - yellow or green
(earth) wire to the terminal in the
plug marked ‘E’ or with the symbol
f or coloured green and yellow or
green.
2 Connect the blue (neutral) wire to
the terminal in the plug marked ‘N’
or coloured black.
3 Connect the brown (live) wire to the
terminal in the plug marked ‘L’ or
coloured red.
With the alternative plugs a 13A fuse must
be fitted either in the plug or adaptor or
in the main fuse box. If in doubt contact a
qualified electrician.