Figure 31, Tool for piston seal 6.2617.010 – Metrohm 850 Professional IC Cation Manual User Manual
Page 70
Advertising
4.5 High pressure pump
■■■■■■■■■■■■■■■■■■■■■■
62
■■■■■■■■
850 Professional IC– Cation
parts: a tip for removing the old piston seal and a sleeve for inserting the
new piston seal.
2
1
Figure 31
Tool for piston seal 6.2617.010
1
Pin
Pin for removing the old piston seal.
2
Sleeve
Sleeve for inserting the new piston seal.
Caution
Screwing the 6.2617.010 special tool for the piston seal into the piston
seal destroys this completely!
1 Removing the piston seal
Caution
Avoid touching the sealing surface in the pump head (17-4) with
the tool.
Screw the special tool for the piston seal (31-1) with the narrow side
just as far into the piston seal as the same can be removed.
Advertising