Banner QMT72 Rope Pull Switches - Manual (Page 9)

Accessories
Cable Glands
Model Size
For Cable
Diameter
Dimensions Used With
SI-QM-CGM20 M20 × 1.5 Metal
5.0 to 12.0 mm
(0.20 to 0.47
inches)
M20 x 1.5
24.0 mm
(0.94")
35.5 mm
(1.40")
SI-LM40 Safety Interlock
Switches
SI-QM100 Safety Interlock
Switches
RP-RM83 Rope Pull Switches
RP-LM40 Rope Pull Switches
RP-QM72/QMT72 Rope Pull
Switches
RP-QM90 Rope Pull Switches
Conduit Adapters
Model Size Thread Conversion Dimensions Used With
SI-QM-M20
½ in-14 NPT
Metal M20 × 1.5 to ½
in-14 NPT
23.0 mm
(0.91")
M20 x 1.5
24.0 mm
(0.94")
1/2"-14 NPT
Internal Thread
O-ring
SI-LM40 Safety Interlock
Switches
SI-QM100 Safety Interlock
Switches
RP-RM83 Rope Pull Switches
RP-LM40 Rope Pull Switches
RP-QM72/QMT72 Rope Pull
Switches
RP-QM90 Rope Pull Switches
One conduit adapter is supplied with each switch.
Components for the Wire Rope Assembly
Thimble Clamp
Pulley
Turnbuckle Eye Bolt
Model Length Description Wire Rope
RPA-C2-10 10 m (33 ft)
3 mm steel wire rope with 0.5 mm red PVC jacket
(unterminated)
RPA-C2-20 20 m (66 ft)
RPA-C2-50 50 m (264 ft)
RPA-C2-80 80 m (264 ft)
Model Quantity Description Thimble
RPA-T2-4 4 Thimble for 3 mm wire rope
Rope Pull Switches
P/N 62084 Rev. C www.bannerengineering.com - tel: 763-544-3164 9