Banner SureCross DX80 Wireless Networks - Manual (Page 9)

Consumption: Less than 1.4 W (60 mA) at 24V dc
Housing
Polycarbonate
Weight: 0.26 kg (0.57 lbs)
Mounting: #10 or M5 (M5 hardware included)
Max. Tightening Torque: 0.56 N·m (5 in·lbf)
Wiring Access
One 1/2-inch NPT port, One 5-pin Euro-style male con-
nector
* For European applications, power the DX80 from a Limited Pow-
er Source as defined in EN 60950-1.
Inputs
Discrete Inputs
Rating: 3 mA max current at 30V dc
Sample Rate: 62.5 milliseconds
Report Rate: On change of state
Discrete Input ON Condition
PNP: Greater than 8V
NPN: Less than 0.7V
Discrete Input OFF Condition
PNP: Less than 5V
NPN: Greater than 2V or open
Analog Inputs
Rating: 24 mA
Input 1 Sample/Report Rates: 1 second
Input 2 Sample/Report Rates: 1 second / 16 seconds
Accuracy: 0.1% of full scale +0.01% per °C
Resolution: 12-bit
Thermistor
Model: Omega’s 44006 or 44031 families of 10 kOhm
Sample/Report Rate: 16 seconds
Accuracy: 0.4° C (10 to 50° C); Up to 0.8° C (−40 to
+85° C)
Outputs
Discrete Output
Update Rate: 1 second
ON Condition: Less than 0.7V
OFF Condition: Open
Discrete Output Rating (NMOS)
Less than 10 mA max current at 30V dc
ON-State Saturation: Less than 0.7V at 20 mA
Output State Following Timeout
De-energized (OFF)
Switch Power Outputs (SP1)
One, Constant and DIP switch configurable
Environmental
Rating
IEC IP67; NEMA 6; (See UL section below for any ap-
plicable UL specifications)
Operating Conditions
Temperature: −40 to +85° C (Electronics); −20 to +80°
C (LCD)
Humidity: 95% max. relative (non-condensing)
Radiated Immunity: 10 V/m, 80-2700 MHz
(EN61000-6-2)
Shock and Vibration
IEC 68-2-6 and IEC 68-2-7
Shock: 30g, 11 millisecond half sine wave, 18 shocks
Vibration: 0.5 mm p-p, 10 to 60 Hz
Refer to the SureCross™ DX80 Wireless I/O Network product
manual, Banner p/n 132607, for installation and waterproofing in-
structions. Operating the devices at the maximum operating condi-
tions for extended periods can shorten the life of the device.
Certifications
Included with Device (Low-Profile Housings)
The following items ship with the low-profile housing DX80 radios.
Included with Device Model Qty Item
Mounting Hardware Kit BWA-HW-001 4 Screw, M5-0.8 x 25mm, SS
SureCross DX80 FlexPower Solar Node
P/N 140373 rev. B www.bannerengineering.com - tel: 763-544-3164 9