Blaupunkt BARCELONA MP35 - Manual (Page 11)

42
➮
Press the MENU button
7
.
➮
Press the or button
6
repeat-
edly until “BEEP ON” or “BEEP
OFF” appears in the display.
➮
Adjust the beep setting using the
buttons
6
. “OFF” means the
beep is switched off and “ON”
means the beep is switched on.
When you have finished adjusting the
setting,
➮
press the MENU button
7
.
Telephone audio
If your car sound system is connected
to a mobile telephone, the sound sys-
tem’s volume will be muted as soon as
you “pick up” the telephone. The tele-
phone call is then outputted over the car
sound system’s loudspeakers. This re-
quires that the mobile telephone be con-
nected to the car sound system as de-
scribed in the installation instructions.
You will need a cable for this with the
following Blaupunkt number: 7 607 001
503.
If the sound system receives a traffic
announcement during a telephone call,
the system will only play the traffic an-
nouncement after you have finished the
call.
You can set the volume at which you
want telephone calls to be initially heard.
➮
Press the MENU button
7
.
➮
Press the or button
6
repeat-
edly until “TEL VOL” appears in the
display.
ADJUSTING THE VOLUME
➮
Set your preferred volume level us-
ing the
buttons
6
.
When you have finished making your
changes,
➮
press the MENU button
7
twice.
Note:
●
You can use the volume control
3
to adjust the volume of a telephone
call whilst the call is being output-
ted by the sound system.