Blaupunkt BARCELONA MP35 - Manual (Page 13)

44
Switching REGIONAL on/off
➮
Press the MENU button
7
.
➮
Press the or button
6
repeat-
edly until “REG” appears in the dis-
play. “OFF” or “ON” is displayed
alongside “REG”.
➮
To switch REGIONAL on/off, press
the or button
6
.
➮
Press the MENU button
7
.
Selecting the waveband /
memory bank
You can use this device to receive pro-
grammes broadcast over the FM fre-
quency range as well as the MW and
LW (AM) wavebands. There are three
memory banks available for the FM
waveband (FM1, FM2 and FMT) and
one for each of the MW and LW wave-
bands. Six stations can be stored in
each memory bank.
To switch between the FM memory
banks (FM1, FM2 and FMT) and the
MW and LW wavebands,
➮
briefly press the BND•TS button
4
.
Tuning into a station
There are various ways of tuning into a
station.
Automatic station seek tuning
➮
Press the or button
6
.
The radio tunes into the next receiva-
ble station.
Tuning into stations manually
You can also tune into stations manual-
ly.
Note:
●
You can only tune into stations
manually if the RDS function is de-
activated.
➮
Press the or button
6
.
Browsing through broadcasting
networks (only FM)
If radio stations provide several pro-
grammes, you have the option of brows-
ing through their “broadcasting net-
works”.
Note:
●
The RDS function must be activat-
ed before you can use this feature.
➮
Press the or button
6
to
switch to the next station on the
broadcasting network.
Note:
●
When using this feature, you will
only be able to switch to stations
that you have received once before
already. To receive the stations,
use the scan function or the Travel-
store function.
Setting the sensitivity of station
seek tuning
You can choose whether the radio
should only tune into stations providing
good reception or whether it can also
tune into those with a weak reception.
➮
Press the MENU button
7
.
RADIO MODE