Blaupunkt BARCELONA MP35 - Manual (Page 14)

45
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
PORTUGUÊS
➮
Press the or button
6
repeat-
edly until “SENS” and the currently
set value appear in the display.
“SENS HI6” means that the tuner is set
to the highest sensitivity setting. “SENS
LO1” means it is set to the lowest sen-
sitivity setting.
➮
Set the desired sensitivity using the
buttons
6
.
When you have finished adjusting the
setting,
➮
press the MENU button
7
.
Note:
●
You can set different sensitivity
levels for FM and MW or LW.
Storing stations
Storing stations manually
➮
Select the memory bank that you
want (FM1, FM2, FMT) or one of
the wavebands (MW or LW).
➮
Tune into the station that you want.
➮
Press and hold down one of the
station buttons 1 - 6
9
for longer
than two seconds to assign the sta-
tion to that button.
Storing stations automatically
(Travelstore)
You can automatically store the six sta-
tions providing the best reception in the
region (only FM). The stations are stored
in the FMT memory bank.
Note:
●
Any stations previously stored in
this memory bank are deleted in
the process.
➮
Press and hold down the BND•TS
button
4
for longer than two sec-
onds.
The storing procedure begins. “FM
TSTORE” appears in the display. After
the process has completed, the radio
will play the station that is stored in
memory location 1 of the FMT memory
bank.
Listening to stored stations
➮
Select the memory bank or wave-
band.
➮
Press the station button 1 - 6
9
that corresponds to the station that
you want to listen to.
Scanning receivable stations
(SCAN)
You can use the scan function to listen
to all the receivable stations briefly. You
can set the scanning time in the menu
to between 5 and 30 seconds (in steps
of 5 seconds).
Starting SCAN
➮
Press and hold down the MENU
button
7
for longer than two sec-
onds.
Scanning begins. “SCAN” appears
briefly in the display followed by a flash-
ing display of the current station name
or frequency.
Cancelling SCAN and continuing
listening to a station
➮
Press the MENU button
7
.
Scanning stops and the radio continues
playing the station that it tuned into last.
RADIO MODE