Black Box LE073AE-R2 - Manual (Page 8)

7
CHAPTER 3: Installation
3.2 Connect the Network Cable
Connect the network cable unit as
illustrated for each model below.
3.2.1 LE071A
AND
LE073A
For the Modular Parallel Adapter
w/SPC for 10BT (LE071A) and the
Modular Parallel Adapter w/EPS for
10BT (LE073A), refer to Fig. 3-2.
Fig. 3-2. Connecting an Unshielded Twisted Pair Cable to the Media
Unit.
NOTE
When used with non-
10BASE-T networks, Link
Integrity should be disabled.
It can be disabled in the
software by using the key-
word DISABLELINK in the
configuration files (NET.CFG,
PROTOCOL.INI) or as a com-
mand line parameter for the
Packet and LANtastic
drivers.