Bissell 1620 - Manual (Page 5)

This User’s Guide is designed to help you get maximum
satisfaction from your PowerLifter Plus Deep Cleaner. Enclosed you’ll
find assembly instructions for cleaning tasks, safety precautions,
cleaning tips, maintenance and troubleshooting information. Please
read this Guide thoroughly before assembling and using your cleaner.
Pay particular attention to the assembly diagram, assembly instruc-
tions, and part names. Locate and organize all parts before assembly.
Familiarize yourself with all parts and features and how they operate.
Following the Guide will enhance your ability to get top performance
from your cleaner for many years.
If you have any questions, or comments please call
BISSELL Consumer Services at 1-800-237-7691.
Your PowerLifter Plus assembles in two quick steps. The only
tool you will need to assemble your cleaner is a Phillips head
screwdriver.
Your PowerLifter Plus is packaged as two primary components: the
Lower Body and the Handle Assembly. To assemble:
Slide the Handle Assembly (with attached Quick Release
Cord Wrap™) down into the Lower Body until it will go
no further.
Secure the handle by placing one (1) Phillips head
screw (supplied) through the screw opening in the Lower
Body and into the rear of the Handle Assembly. Tighten with
screwdriver until secure.
Assembly is now complete.
Always use BISSELL Deep Cleaning Formulas. Non-BISSELL cleaning
solutions may harm your cleaner and void the warranty.
5
How To Assemble Your PowerLifter Plus
How to Use This Guide
1.
2.
Phillips
Head
Screw
What Comes With Your PowerLifter Plus
Tough Stain Tool 16 oz. Fiber Cleansing
Formula
™ with
Scotchgard protection