Bissell 1620 - Manual (Page 6)

6
The Basics: How Your PowerLifter Plus Works
Tip:
Deep cleaning
carpeting and
upholstery
regularly can
reduce dust
and allergens in
your home.
Power
The Power Switch controls power to the machine.
The powered brush roll at the Floor Nozzle is designed to enhance
cleaning performance. The bristle pattern lifts out the deep down
dirt while gently grooming carpet fibers. The floating suspension
self-adjusts to all carpet heights and protects your carpet while in
use. When the machine handle is in the fully upright position, the
CarpetSaver
™ feature automatically raises the brush off the carpet.
Provides custom control for each cleaning job.
Lift the SmartMix concentrate bottle up and out of the
machine base.
Turn the bottle over so the valve cap is in an upward
position. Unscrew the cap and fill the bottle to the mark
with BISSELL Deep Cleaning Formula.
Replace the cap until snug.
Replace SmartMix Bottle.
Choose the SmartMix setting that fits the cleaning job.
WATER ONLY – Provides gentle cleaning or a final
rinse after cleaning.
NORMAL – Automatically provides the best mix of
water and concentrate for most cleaning jobs.
HIGH TRAFFIC – Automatically mixes the right
amount of water and concentrate to dissolve tough
grime and heavy soil.
NOTE: Residual cleaning materials left in carpet
from other products may cause excessive
foaming when picked up. If foam is overflowing
tank, move SmartMix Dial to “WATER ONLY”
position until the condition stops.
NOTE: Both the SmartMix Bottle and the clean
water tank must have liquid in them for the
machine to spray. If one is empty, the machine
will temporarily lose its prime and not apply
either cleaning solution or water.
Important: If you are using the WATER ONLY setting, be sure
to fill the SmartMix Bottle with water also!
DirtLifter ® Powerbrush
SmartMix ®
WARNING:
To reduce the risk
of fire, electric
shock or injury
unplug from outlet
before servicing.
OFF ON
ON
OFF
Power
Switch
1.
2.
3.
4.
5.
SmartMix
Bottle
SmartMix
Dial
When filling bottle o
storing unit, set
Dial to:
HIGH
TRAFFIC
WATER ONLY
NORMAL