Brady label maker - Manual (Page 175)

Applying Color ¡ 8 - 7
Choosing color on the Multicolor and Color & Cut
systems
If you have the Multicolor or the Color & Cut system, the options offered
on the Object Color screen also depend on the type of ribbon installed
at the time you choose the Color option.
If you swap in a different ribbon during construction of the label or
while editing it, the Object Color screen changes according to the
characteristics of the new ribbon, as described in the following sections.
With a continuous color ribbon installed
The Object Color screen looks similar to Figure 8-2 when you have a
continuous color ribbon installed on your Multicolor or Color & Cut
system:
Figure 8-2. Object Color screen, continuous color ribbon on the Color & Cut system.
Hint! Use this screen to set object colors at composition time without
having to swap in each ribbon. You won’t have to swap in the
different ribbons until you print the label.
The color boxes show the continuous color ribbons available (including
the currently installed ribbon). The Current color field shows the color
The color boxes
show the colors
available in
continuous color
ribbons.
This box shows
the background
color (the tape
installed).