Brady label maker - Manual (Page 229)

Printing ¡ 11 - 23
Figure 11-11 and Figure 11-12 below illustrate how you can save tape
with Supply saver enabled.
Figure 11-11 shows your output with Supply saver enabled and an 8”
paneled ribbon installed. In this job, you want to print three copies of a
single label. The system first checks to see if the labels meet the size
criteria. If they do, the system stacks the labels and prints this output:
Figure 11-11. Sample output with Supply saver ON.
System
shears here
8 inches