Brady label maker - Manual (Page 209)

Printing ¡ 11 - 3
than the two inch (51mm) minimum page length, the label and page
print like this:
Figure 11-1. Sample short label.
Note: The label length and shear lines in Figure 11-1 are shown to
illustrate the concepts discussed here. Those lines will not
display on your screen.
Since two inches (51 mm) is the minimum supply length the system
permits for reliable delivery of a label, the shear cut is at two inches,
although your label is only one inch long. (You will need to trim the
excess supply by hand.) See Checking Length on page 11-12 for more
information.
Multiple labels on a page
You may print multiple labels on a single page when the Supply saver
option on the Printing tab of either the System Setup screen or the
Preferences screen is enabled. (See Supply saver option on page 11-
22 for more information.)
System
shears here
A single page
Your actual
label length