BT Digital Cordless Telephone - Manual (Page 16)

Elements – New Style – Edition 4 – 31.08.06 – 7644
If you experience any problems, please call the Helpline on 0870 605 8047 or email [email protected]
Switch the handset power on/off
To switch off:
1. Press and hold until the display goes off.
To switch on:
1. Press and hold for 3 seconds and the display will come
back on.
Make an external call
1. Lift the handset and press . The and symbols are
displayed.
2. When you hear the dialling tone, dial the number you want.
Preparatory dialling
1. Enter the number first. If you make a mistake, press to
delete the last digit.
2. Press to dial.
End a call
1. Press .
Or
Place the handset back on the charger.
EXT
When you make a call, the backlight
on the handset display comes on and
the In Use light on the base flashes.
Press to enter a pause in the
dialling sequence.
You can enter a pre-dial number up to
32 digits long, Only the last 12 digits
will be displayed.
Using the phone
Call timer
Your handset will automatically time
the duration of all external calls. The
handset display shows the call
duration both during and for a few
seconds after your call.
16