BT Freestyle 130 - Manual (Page 17)

Using your Freestyle 130
15
Ending an intercom call:
• Press the INTERCOM button on
the handset or base unit. Both
INTERCOM lights on the handset
and base unit go out.
To call the handset from the
base unit
At the base unit:
• Press the INTERCOM button on
the base unit. The base unit
INTERCOM light flashes and both
the handset and base unit ring.
If the handset does not reply to an
intercom call, press the
INTERCOM
button again to clear the call. You
cannot make an intercom call if the
handset is busy.
At the handset:
• Press the INTERCOM button and
speak. The INTERCOM light stops
flashing but stays on.
Ending an intercom call:
• Press the INTERCOM button on
the handset or base unit. Both
INTERCOM lights on the handset
and base unit go out.
To adjust the INTERCOM
loudspeaker volume at the
base unit
• Press the left-hand side of the
VOLUME switch to lower the
volume.
• Press the right-hand side of the
VOLUME switch to raise the
volume.
You cannot use the intercom while a
call is in progress. The intercom will
beep for 60 seconds and then
automatically cut off if not answered.
INTERCOM
If there is an incoming call when using
the intercom, the base unit and
handset will ring. To take the call,
press the TALK button on the handset.
The intercom call is cut off automatically.
INTERCOM