Operation, Using the dryer – Bosch WTMC6321US User Manual

Page 17

Advertising
background image

17

Operation

Using the dryer

1. Open the door.

2. Check lint filter.

The filter should be cleaned after

and before every drying process.

Cleaning the filter reduces the

drying time and saves energy.

3. Rotate program selector to the

desired program.

Select the program which

corresponds to the laundry in the

dryer from the program selection

table (see page 16).

The dryer light turns on inside the

drum.

i

The estimated remaining time will

be indicated.

i

Lint filter indicator flashes for

5 seconds - Check lint filter"!

i

The Start/stop" indicator light

starts flashing.

4. Select Additional Options" on the

display.

More detailed information on the

individual additional options can

be found on page 14.

5. If required, select Option" by

pressing the button.

The Options" are explained on

page 15.

i

The estimated remaining time will

be updated.

6. Place laundry in the empty drum.

Put each piece of laundry into the

machine separately.

For best results the laundry to be

dried must be sorted according to

type of laundry and desired degree

of drying. For further information

see page 13.

i

Observe drying symbols of the

laundry manufacturer.

If drying woolen clothing and

shoes, see the information on

page 61 and page 18.

Ensure that there is only laundry in the

drum. Check that all items are

completely in the drum.

7. Close the door.

The Start/Stop" indicator light

continues flashing.

i

If you have chosen a time program

don't forget to select a time.

Otherwise the Start/Stop"

indicator light will not flash and the

dryer will not start.

i

If the door has not been closed

properly, the dryer will not start.

8. Press the Start/Stop" button. The

Start/Stop" indicator light

illuminates.

i

The program starts with an

acoustic signal (if set).

If an automatic program has been

selected, the indicator lights indicate

the progress of the program sequence.

i

At the end of the program

sequence Damp dry an acoustic

signal is emitted (if set).

i

At program end an acoustic signal

is emitted (if set) and the LED

Wrinkle block" illuminates.

i

When the drying process is

complete (program or selected

time program ended), the drum

rotates at specific intervals. This

prevent the laundry from creasing

(see Extended Wrinkle Block",

page 15).

9. Open the door.

Advertising
This manual is related to the following products: