Ec declaration of conformity – HK Audio DSM 2060 User Manual

Page 10

Advertising
background image

DSM 2060 Manual 1.0

10 Technical Specification

General

Inputs

2

Input Impedance

> 10 kOhm Electronically balanced

Maximum Input level

+20 dBu

Outputs

6

Output Impedance

<100 Ohm, ground balanced

Maximum Output Level

+22 dBu into 600 ohm load

Sample Rate

96 kHz

Bit Depth

24 bit

Frequency Response

10 Hz to 40 kHz, +/- 3 dB (filters disabled)
20 Hz to 20 kHz, +/- 0.5 dB (filters disabled)

THD

<0.01%, (+10 dBu, 20 Hz to 20 kHz, 30 kHz bandwidth)

Dynamic Range

>112 dB (A weighted, 22kHz bandwidth)

Serial Comms Data

38.4 kbaud, format: 8 data, 1 stop, no parity

Processing

Gain

+20 dB to -80 dB and mute, 0.2 dB steps

Output Ch. Source

Input A, Input B and Sum A+B

HP filter frequency

Off, 10 Hz to 25.4 kHz, 1/36 octave steps

LP filter frequency

10 Hz to 25.4 kHz and off, 1/36 octave steps

LP / HP filter type

12, 18 & 24 dB/octave Bessel and Butterworth
12, 24 and 48 dB/octave Linkwitz Riley
4th or 8th order Hardman

Delay

Input 400 ms, output 80 ms

Limiter

High performance limiter, adjustable threshold
in 0.2 dB steps, automatic time constants

EQ frequency

10 Hz to 25 kHz, 1/36 octave steps

EQ gain

+15 dB to -15 dB, 0.2 dB steps

EQ width

5.0 to 0.1 octaves bandwidth, 1/36 octave steps

Connectors

Audio inputs

3 pin female XLR

Audio outputs

3 pin male XLR

Serial comms

Sub D

Network comms

Future option

Mains

3 pin IEC

Mains Power

Universal switch-mode PSU, 85 v to 250 v AC, 50 / 60 Hz

Consumption

< 25 watts

Dimensions.

44 mm (H), 482 mm (W), 254 mm (D)

Weight

2.7 Kgs net

EC Declaration

of Conformity

We
Linea Research Limited

registered in
England, company No. 4742566

registered at
South Lodge House
Ickleton
Near Saffron Walden
CB10 1SH, England

Certify and declare under our
responsibility that the following product
DSM 2060 Digital Loudspeaker Proces-
sor
conforms with the following harmonized
European standards
• EN55103-1 Electromagnetic emissions

in environments E1, E2, E3, E4

• EN55103-2 Electromagnetic immunity

in environments E1, E2, E3, E4

• EN60065 Electrical product safety

and therefore complies with the
essential requirements and provisions
of EU directives
• 89/336/EEC Electromagnetic Compati-

bility directive, as amended

• 73/23/EEC Low Voltage Equipment di-

rective, amended by 93/68/EEC

MS D-1390a 02/06

Advertising