HK Audio DSM 2060 - Manual (Page 7)

7
English
whilst trying to maintain the currently viewed
processing block. If the channel you scroll to does
not have the currently viewed processing block,
the next one will be shown instead.
NB. When the unit powers-up, the settings will be
the same as those when the unit was last
switched off.
Presets
The device contains a total of forty-five user and
Factory Presets. The user cannot overwrite the
basic mono, basic stereo or Factory Preset
programs.
Preset Recall
To select an existing preset, press the Recall
Button so the indicator above it illuminates. Turn
parameter knob A until the required preset
number is shown on the display.
Factory Presets are indicated by a box symbol
appearing after the preset number. Press the
Recall Button again to activate the Preset.
Pressing any other button will cancel the
operation.
Users can develop their own Preset based on one
of the Basic or Factory Presets stored within the
device. Once a basic or user Preset has been re-
called, a user has complete freedom to adjust any
or all of the parameters. Factory Presets can be
used as the basis for user Presets but they have
some parameters that are predefined as a
function of the loudspeaker system. These para-
meters are ‘hidden’ from the user, as they should
be constant regardless of application.
Preset Store
To store the current Preset in a user location,
press the Preset Store Button so the indicator
above it illuminates. Turn the first parameter knob
until the required Preset location number is show
on the display. A Preset name of up to 12
characters in length can be entered using para-
meter knobs B and C. Pressing the Store Button
again completes the process and stores the
Preset. As with Preset Recall, pressing any other
button cancels the operation.
The user can overwrite non-protected Presets
only; if an attempt is made to save a Preset in a
location already occupied by a basic or Factory
Preset a ‘Locked Preset’ message is displayed.
5 DSP Processing layout
Input DSP block diagram
Output DSP block diagram