Human Touch HT 1470 Back Massage Pad - Manual (Page 4)

humantouch.com
6 7
ENGLISH
Your Human Touch ™ massage pad
comes fully assembled – simply
place it onto the seat of your
choice, secure it if you wish,
plug it in and power it on.
Unpack the box
Backrest Pad
3. Plug it in
Plug the power cord into a 120-volt power source.
1. Place the pad
Place your Human Touch ™ massage pad onto any chair or sofa. Its thin-ply
ergonomic design rests comfortably between you and the seat.
get ready
CAUTION: Do not position the
massage pad on a surface that is
reclined further than shown.
Chair Sofa
Controller
2. Secure the back massage pad (optional)
To secure the back massage pad to the backrest of a chair:
1. Pull up on the flap located on the back of the massage pad to expose the retaining straps.
The straps are held in place by hook-and-loop fasteners.
2. Open the straps, then wrap them snugly around the chair.
3. Attach the straps to each other, using the hook-and-loop fasteners.
Flap
Strap
Back of pad
Strap
Seat Pad
4. Power on
Push the power/park button to power on the back
massage pad.
humantouch.com