JK Audio innkeeper 4 User Manual
Page 6
6
Operation
Connecting Cables
Although each application will require a slightly different setup, the
following is a general cable connection setup and explanation. Using
balanced XLR cables (not included) with 1/4” TRS adapters if neces-
sary for your mixer, make all connections as shown.
•
Phone Line - Connect the supplied RJ-11 phone line cable(s) be-
tween the RJ-11 jack(s) marked "Line" and your wall jack(s). Be
sure these jacks can support standard analog telephone opera-
tion. The innkeeper 2/4 will not work with "dry pair" phone line con-
nections.
•
Send XLR - Connect a line level (mix-minus) audio signal to the
Send jack(s) on the innkeeper 2/4. Audio will be sent down only
the corresponding phone line.
•
Master Send XLR - Connect a line level (mix-minus) audio signal
to the Master Send input. Audio will be sent down either or both
phone lines based upon your menu selections.
•
Caller XLR - Connect Caller output(s) to line level input(s) on your
audio equipment. Each caller output jack will contain audio only
from its corresponding phone line. Local audio and audio from al-
ternate phone lines will not be present on these jacks. Innkeeper 2
can send isolated caller audio, mixed caller audio, or mixed caller
and local audio from the Caller XLR based on selections made in
the Conferencing menu.
•
Power - Connect the supplied power cable to a 110 - 220 VAC
power outlet.
Auxiliary Telephone(s)
You can use an auxiliary telephone to place or screen a call. When
you are ready to take the call on innkeeper 2/4, press the Call button
for the corresponding phone line. That line will now pass through the
digital hybrid. If your telephone has a “Hold” feature, you can answer
the phone and place the call on hold. When you press the “Call” but-
ton, the innkeeper will automatically release the hold and connect
that line through the hybrid. If you need to take the call back on the
auxiliary telephone, simply pick up the phone before the innkeeper
2/4 Drop button is pressed for that line.
15
Operation (continued)
Operation - Conference Options
Advanced Conference Options Signal Flow Diagrams