Kino Flo BarFly 200D - Manual (Page 6)

Mounting
Align center pin of mounting plate (MTP-BL41S) with
mating receptacle on fixture.
Align locking pin with the yellow arrow.
Rotate mount plate in direction of the small arrow.
The locking pin will snap into place.
The safety wire loop provides an attachment point for
a safety chain if fixture is hung from a grid.
A 180° turn loosens the orientation of the mount.
A right turn tightens the mount.
The tension on the lock lever may be adjusted by
pulling the handle away from the mount.
This disengages the handle from the screw
mechanism and allows the lever to be reoriented.
6
To remove the plate, pull up on the locking pin and
reverse the mounting procedure.