Kino Flo Select Single(115, 105) - Manual (Page 5)

5
Fixture Assembly
The 4Bank, Double and Single fixtures are comprised of a removable Louver, Reflector
and Lamp Harness. The Louver and Reflector are held in place with Velcro fasteners.
The Lamp Harness is secured by means of a ¼ turn fastener and two clips.
The Harness wiring is color-coded. The same color-code must match at each end of
the lamp for proper operation.
To Release the Lamp Harness
Remove the harness from 2 clips located under the reflector. Rotate the ¼ turn
fastener clockwise to release harness.
The lamps can operate independent of the fixture
allowing them to be built into sets or custom soft boxes
or hand-held as a single tube for an eye-light.
WARNING: Always use safety-coated lamps to avoid
injury if lamp breaks.
4Bank Harness Double Harness
Lamp Harness Color Codes
Red
Yellow
Black
Blue Red
Yellow