Canon QT5-0385-V01 - Manual (Page 12)

Basic Printing
8
3
Load the paper.
You can use general copy paper or Canon’s Super White Paper.
You can load up to 150 sheets of plain paper (64 gsm or 17 lb, 13 mm
or 0.52 inches in height) in the auto sheet feeder.
However, the paper may not feed correctly depending on the type of
paper and the environment (temperature, high humidity and low
temperature or low humidity). If this happens, reduce the number of
sheets of paper by about half (approximately 5 mm/0.2 inches).
Do not touch the printed surfaces until the ink dries. For specific drying
times, refer to the instructions packaged with your media.
(2) Align the paper stack
against the cover
guide on the right
side of the paper
support.
Ensure that the
cover guide
stands when
you load paper
in the auto
sheet feeder.
(3) Pinch the paper
guide and slide
it against the
left side of the
paper stack.
Load limit mark
Do not load beyond this load limit mark.
(1) Load the paper
into the auto
sheet feeder with
the print side
facing UP.
iP6700D_QSG_US.book Page 8 Thursday, April 13, 2006 11:10 AM